AutoCAD 2004 for Dummies

Rating:
Summary: ...to suffer the slings and arrows of outrageous criticism!
Review: Are we looking at the same book?! At the risk of sounding like the defensive, whiny author (again!), I humbly submit:

A reader from Mc Lean, VA writes: "I picked up the manual that came with AutoCAD. The manual that came with the software was better than this book!" That's strange, since AutoCAD 2004 doesn't come with a printed manual.

wizard621 from Denver, CO writes: "There are so many typos, grammatical errors and mismatches between the examples and the software...." That's strange, too, since I recently went through the book in order to correct errors in preparation for a new printing. I found exactly five misspellings, no grammatical errors, and a handful of places where the description didn't match the software.

sbruce28 from Sandston, Virginia writes: "Doesn't anyone proof read [sic] anymore?" Yes, I do, the copy editor does, and the proofreader does. This kind of criticism is suspect when it comes from someone who doesn't realize that the verb is spelled "proofread" and who spells "AutoCAD" two different ways, both incorrect, in the same sentence.

I will agree that this book expects readers to be somewhat familiar with a few basic drafting concepts - such as scale, the representation of three-dimensional objects on two-dimensional sheets of paper, and how real-world objects are shown on (printed) technical drawings. If you don't understand or aren't willing to learn a little bit about how technical drawings are presented in your industry, then you probably aren't ready to use a CAD program.

In fact, several parts of the book review basic drafting concepts and connect them to corresponding AutoCAD concepts and practices. For example, Chapter 3 explains how drawing scale (a fundamental drafting concept) relates to drawing scale factor (an essential CAD concept). And Chapter 12 describes how many AutoCAD drafters represent printed lineweights (drafting) with object colors on the screen (CAD).

Rating:
Summary: ...to suffer the slings and arrows of outrageous criticism!
Review: Are we looking at the same book?! At the risk of sounding like the defensive, whiny author (again!), I humbly submit:

A reader from Mc Lean, VA writes: "I picked up the manual that came with AutoCAD. The manual that came with the software was better than this book!" That's strange, since AutoCAD 2004 doesn't come with a printed manual.

wizard621 from Denver, CO writes: "There are so many typos, grammatical errors and mismatches between the examples and the software...." That's strange, too, since I recently went through the book in order to correct errors in preparation for a new printing. I found exactly five misspellings, no grammatical errors, and a handful of places where the description didn't match the software.

sbruce28 from Sandston, Virginia writes: "Doesn't anyone proof read [sic] anymore?" Yes, I do, the copy editor does, and the proofreader does. This kind of criticism is suspect when it comes from someone who doesn't realize that the verb is spelled "proofread" and who spells "AutoCAD" two different ways, both incorrect, in the same sentence.

I will agree that this book expects readers to be somewhat familiar with a few basic drafting concepts - such as scale, the representation of three-dimensional objects on two-dimensional sheets of paper, and how real-world objects are shown on (printed) technical drawings. If you don't understand or aren't willing to learn a little bit about how technical drawings are presented in your industry, then you probably aren't ready to use a CAD program.

In fact, several parts of the book review basic drafting concepts and connect them to corresponding AutoCAD concepts and practices. For example, Chapter 3 explains how drawing scale (a fundamental drafting concept) relates to drawing scale factor (an essential CAD concept). And Chapter 12 describes how many AutoCAD drafters represent printed lineweights (drafting) with object colors on the screen (CAD).

Rating:
Summary: This is a great book
Review: AutoCAD is one of the most complex and powerful programs I have ever seen. It's necessary to understand some potentially intimidating concepts, like paper space, xrefs and plotting procedures. After reading previous reviews of this book, I suspect the reviewers may have been disillusioned when they didn't understand everything about the program after reading part of the book.

I know a good deal about this program and I was glad to get a list and read some commentary about what was new and what was unchanged from the last release. For an experienced user, keeping up with the changes is what it's all about.

Middlebrook is clearly very knowledgeable, but remembers what it's like to be a beginner and is able to write from the point of view of someone who is poking the buttons in this program for the first time. There are often several ways to do things with AutoCAD and it was great to see tips about the easiest way for a novice to do them. In addition to the "how to" there is commentary which illuminates the "why" behind the commands, techniques and concepts. You can't get that from the online help. As someone who has tried to explain this program to people myself, I think this is exactly what's needed.

He also writes from a non-AutoDesk point of view. I got the feeling that I was getting good information rather than the company line as well as some tips that I wouldn't expect to find in the program manuals and online help, like how to save a file so that other people who are using AutoCAD R14 can use it.

It's very readable, which is a rare thing considering the technical subject. There is a sense of humor and it is a pleasure to read.

The bottom line is that it's a great way to get up to speed with the changes if you already have experience with AutoCAD, and if I were learning this program for the first time I would definitely want to have this book in order to make sense out of the program.



Rating:
Summary: Buy something else
Review: I bought this book as a true beginner and wanted to learn as much as I could before getting started on a project. I read the book and it only further confused me. After an exausting read I picked up the manual that came with AutoCAD. The manual that came with the software was better than this book!

Rating:
Summary: AutoCad 2004
Review: If you know something about Autocad save your money, this book is not for you. I bought this book because of the major changes from R3.3 to 2004. Hoping it would cover the new ways to Xref, plot, and so on. It does not, the book gives the broadest overview on these subjects if they get covered at all. To sum it up if you've never used AutoCad before then the book might be worthwhile to you. If you have any previous knowledge of Cad this book will not help much.

Rating:
Summary: Buy something else
Review: My copy ended up in the trash. There are so many typos, grammatical errors and mismatches between the examples and the software, that I should have returned it for a refund. It reads like a rough draft of what could be a book. And to the good people at "Dummies", PLEASE use a proofreader next time.

Rating:
Summary: Save your money
Review: My copy ended up in the trash. There are so many typos, grammatical errors and mismatches between the examples and the software, that I should have returned it for a refund. It reads like a rough draft of what could be a book. And to the good people at "Dummies", PLEASE use a proofreader next time.

Rating:
Summary: What's new in this edition
Review: Okay, so it's more than a little vain for me to rate my own book, but I'd like to correct some misstatements by a previous reviewer and provide some accurate information on what the book does - and doesn't - cover.

At the risk of sounding defensive, I have to say that "A reader from Somerville, MA USA" doesn't accurately represent the book - or AutoCAD. There never was an AutoCAD R3.3. Perhaps this reader means Architectural Desktop 3.3, which was built on AutoCAD 2002.

AutoCAD 2004 doesn't offer new ways to xref. As Chapter 1 of the book describes, AutoCAD 2004 does provide some welcome improvements for working with xrefs, including "a simple method of opening xrefs for editing, more sensible xref search paths, xref change notifications, and a Reference Manager utility." The book addresses all of these changes in Chapters 13 and 15.

AutoCAD 2004's plotting system is in almost all respects identical to the one that Autodesk introduced in AutoCAD 2000 - in other words, plotting didn't change substantially in AutoCAD 2000i, 2002, or 2004. Nonetheless, Chapter 12 of the book does discuss the new shaded viewport plotting options and the incompatibility of AutoCAD 2004's new True Color capability with traditional color-dependent plot styles (CTB files).

So this reader is mistaken about what has changed in AutoCAD 2004 and whether what *has* changed is covered in AutoCAD 2004 For Dummies. Those who want to see what I regard as the most important new features in AutoCAD 2004 and where they're covered in the book can see for themselves on pages 15 and 16 of the "Look Inside" sample pages available from this Web page.

I will agree that this book is not for someone who is well-versed in a recent version of AutoCAD, although I think that the book will help people who are upgrading from old versions (e.g., AutoCAD R14) or whose skills have grown a little rusty. The coverage of new and advanced features is in most cases brief because this is a concise book for beginners rather than a 1200-page tome that attempts to cover everything.

The most important changes in this edition of AutoCAD For Dummies are:

- Coverage of the interface and command changes in AutoCAD 2004, including the new tool palettes, xref improvements, and mText tabs and indents.

- A new "Introduction to 3D" chapter that describes the concepts and commands required in order to get started creating 3D models in AutoCAD. (This one-chapter introduction doesn't pretend to make you an expert in 3D modeling - full treatment of the subject requires a separate book.)

- A new "CAD Standards Rule" chapter that introduces readers to the "why, what, and which" of CAD standards and then discusses the CAD standards checking and enforcement tools in AutoCAD 2004.

- A significantly updated "Drawing on the Internet" chapter that covers the new Reference Manager, PUBLISH, and drawing protection features.

As with the previous edition, this book is for users of AutoCAD 2004 *and* AutoCAD LT 2004. I'm not writing a separate LT book this time around. Instead, I've noted the differences between AutoCAD 2004 and AutoCAD LT 2004, which are few for the purposes of a book of this type.

And as with all of the previous editions, AutoCAD 2004 For Dummies is not just about how to run commands. Throughout the book, I emphasize real, practical techniques for creating technical drawings with AutoCAD. In my view, that's the real strength of the book.

Rating:
Summary: It should be AutoCad 2004 for intermediate users.
Review: This book should be re-title "AutoCad 2004 for Intermediate Users", because it sure wasn't directed at beginners. I was very disappointed in the lack of content and the excessive number of errors. Doesn't anyone proof read anymore? This books makes the assumption that you have at least some sort of CAD knowledge and that you are also very familiar with drafting concepts. I found it difficult to read and very difficult to follow some basic concepts. This book doesn't seem to have a logical flow of ideas or concepts. There were some good tips scattered thoughout that would benefit the experienced Autocad user, who has just upgraded to AutoCad 2004.

Rating:
Summary: It should be AutoCad 2004 for intermediate users.
Review: This book should be re-title "AutoCad 2004 for Intermediate Users", because it sure wasn't directed at beginners. I was very disappointed in the lack of content and the excessive number of errors. Doesn't anyone proof read anymore? This books makes the assumption that you have at least some sort of CAD knowledge and that you are also very familiar with drafting concepts. I found it difficult to read and very difficult to follow some basic concepts. This book doesn't seem to have a logical flow of ideas or concepts. There were some good tips scattered thoughout that would benefit the experienced Autocad user, who has just upgraded to AutoCad 2004.